From the free quote to the final rinse, soft washing for brick in Hickory Withe, TN follows a simple process: inspect, protect, clean, rinse and check. For brick, that means low-pressure wash.
The right method for the job
Cleaning solution: Soft wash for algae and mildew; a masonry-specific cleaner for efflorescence and mortar haze.
What to know about cleaning brick
Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit. Organic growth comes off with a soft wash; mineral deposits such as efflorescence need a masonry-safe cleaner instead of more pressure.
Avoid: Zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet.
How often: Every 2-3 years for most homes.
Is it time for soft washing for brick?
- Green, black or gray film on siding, especially on the north side
- Black streaks running down the roof
- Moss or lichen on shingles or tile
- A musty smell around shaded walls
- Pressure washing would damage the surface
What causes the dirt and stains
- Algae, mold and mildew that grow in shade and humidity
- Roof algae that feeds on the limestone filler in shingles
- Pollen and dust that give growth something to hold on to
- Sprinklers and gutters that keep walls damp
Easy upkeep between cleanings
- Trim back branches and shrubs that touch the house so walls can dry
- Keep gutters clear so water doesn't overflow down the siding
- Spot-clean small areas with a soft brush and mild detergent
- Aim sprinklers away from the house
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
What can go wrong with DIY pressure washing
- Using too strong a mix, which can burn plants and fade surfaces
- Using too weak a mix, which leaves growth alive and it returns quickly
- Climbing ladders with a spray wand and chemicals
- Mistaking soft washing for 'pressure washing on low'
What happens on the day
- Identify the surfaces and the type of growth
- Pre-wet plants, cover sensitive fixtures and close windows
- Apply a solution mixed for the surface and let it dwell
- Rinse at low pressure from the top down
- Rinse plants again and check every side with you
How much does soft washing for brick cost?
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for brick
- Pressure Washing for Brick
- House Washing for Brick
- Driveway Cleaning for Brick
- Sidewalk & Walkway Cleaning for Brick
- Patio Cleaning for Brick
- Paver Cleaning & Sealing for Brick
- Rust Stain Removal for Brick
- Graffiti Removal for Brick
- Efflorescence Removal for Brick
- Exterior Mold & Mildew Removal for Brick
- Pre-Paint Washing for Brick
- Commercial Pressure Washing for Brick
- HOA & Apartment Pressure Washing for Brick
Soft Washing for Brick in Hickory Withe, TN
Mildew and algae are the main reason Tennessee homeowners wash their siding. Shaded walls can turn green within months, and pressure alone doesn't kill the growth, so we use a soft wash solution that does.
Spring pollen season in Tennessee coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.
Red clay soil is common in parts of Tennessee. Rain splashes it onto the bottom of the siding, walls and walkways, and its iron-rich color can stain light surfaces. It usually needs a dedicated clay or rust cleaner rather than pressure alone.
Crews serve all of Hickory Withe, plus Oakland (4.3 mi), Arlington (5.5 mi), Lakeland (8.6 mi) and Cordova (12.2 mi). Call (555) 010-0000 for a free quote in Hickory Withe.
Soft Washing for Brick: frequently asked questions
How much does soft washing for brick cost in Hickory Withe, TN?
Soft Washing for Brick typically costs $300-$800 for a typical single-family home exterior, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for soft washing for brick?
For brick: usually 500-1,500 PSI with a wide fan tip, held well back from the mortar. What we avoid: zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet. The cleaning solution does most of the work, followed by a gentle rinse.
Is soft washing for brick safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule soft washing for brick?
Every 2-3 years for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.